Dtmf Memory - Icom IC-V82 Instruction Manual

7

DTMF MEMORY

■ Programming a DTMF code
The transceiver has 16 DTMF memory channels (d0 to dF)
for storage of often-used DTMF codes of up to 24 digits.
qPush [A•
], then push [0•
FUNC
.
MODE
• Rotate [VOL] to select "dtm.OF," if necessary.
0
A
Push
FUNC
OPT
wPush [0•
] for 1 sec. to enter the DTMF memory.
OPT
• One of "d0" to "dF" appears.
0
Push for 1 sec.
OPT
eRotate [VOL] to select the desired channel.
rPush [0•
] for 1 sec. to enter the DTMF programming
OPT
mode.
• "_ _ _ _ _" appears.
• Programmed memories can be cleared in this way.
0
Push for 1 sec.
OPT
26
] to enter
OPTION SET
OPT
tPush the digit keys, [A•
FUNC
] and [✱• ] to enter the desired DTMF code.
[#•
BANK ENT
• A maximum of 24 digits can be input.
• [✱• ] enters as "E", [#•
ENT
• If a digit is mistakenly input, push [MONI] or [PTT] momentarily
then repeat from step q.
FUNC
TONE
DUP
PRIO
yPush [MONI] or [PTT] to fix the digits and exit the DTMF
programming mode.
• Programmed DTMF codes sound when [MONI] is pushed.
The DTMF memory consists of 5 pages that are 1st to 5th, 6th to
10th, 11th to 15th, 16th to 20th and 21st to 24th digits.
1st page indication 2nd page indication
4th page indication 5th page indication
Appears
], [B• ], [C• ], [D•
CALL MR CLR
] enters as "F."
BANK
A B C D
CALL MR CLR
1 2 3
P.BEEP T.SCAN BANK
4 5 6 0
SCAN SKIP OPT
7 8 9
SET H/M/L ENT
3rd page indication
Appears
Blinks
],