Basic Operation - Icom IC-V82 Instruction Manual

4

BASIC OPERATION

■ Display type
The transceiver has 3 display types to suit your operating
style.
The display type is selected in
"Frequency Indication" type
Displays operating frequency.
"Channel Number Indication" type
Displays memory channel number. In this type only pre-
programmed memory channel numbers are displayed.
VFO mode cannot be selected.
• When the channel indication type is selected, only the following
functions can be performed.
- Scan function (p. 28)
- Output power setting (p. 15)
- DTMF memory function (p. 26)
- Key lock function (see right content)
- Scan pause timer setting, function key timer setting and LCD
backlight setting in
16
INITIAL SET MODE
USING
(p. 63).
INITIAL SET MODE
(p. 59)
SET MODE
"Channel Name Indication" type
Displays memory channel name you have assigned. In this
display pre-programmed memory channel names are dis-
played.
VFO mode is selectable.
• Programmed frequencies are indicated pre-programmed in the
selected memory channel.
• Push and hold [MONI] to display the operating frequency.
■ Key lock function
The key lock function prevents accidental frequency changes
and function activation.
Push [A• ] then push [✱•
FUNC
for 1 sec. to toggle the function ON and
OFF.
• " " appears while the lock function is
activated.
• [PWR], [PTT], [VOL] and [MONI] can
be operated regardless of this setting.
]
ENT
A
FUNC
ENT