Icom IC-V82 Instruction Manual page 53

D D Your call sign note programming
Your call sign can be added some information such as oper-
ating radio type, place or area. Call sign note can be stored
up to 6 type, and each call sign note programmed up to 4
characters.
q Push [A•
] and [0•
FUNC OPT
push [Y Y ] or [Z Z ] several times to select the call sign select
mode.
• "myS" appears.
w Push [0•
] for 1 sec. then rotate [VOL] to select the de-
OPT
sired call sign note channel.
e Push [Y Y ] (or [Z Z ]) to set into call sign note programming
condition.
• The 1st digit blinks and channel indication stops blinking.
r Rotate [VOL] to set the desired character or code.
• Push [Z Z ] or [Y Y ] to move the cursor to left or right, respectively.
] to enter , then
OPTION SET MODE
DIGITAL MODE OPERATION
t Push [Y Y ] (or [Z Z ]) to select 2nd digit, then rotate [VOL] to
set the desired character or code.
• 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming your call sign note.
y Push [0•
] to fix the call sign.
OPT
u Rotate [VOL] to select an another channel from "C1" to
"C6."
i Repeat steps w to u to program your call sign channels.
11
11
41