Pocket Beep Operation - Icom IC-V82 Instruction Manual

9
SUBAUDIBLE TONES

■ Pocket beep operation

This function uses subaudible tones for calling and can be
used as a "common pager" to inform you that someone has
called when you were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Set the desired CTCSS tone frequency or DTCS code in
.
SET MODE
• See p. 33 for programming details.
e Push [A•
], then push [1•
FUNC
• Repeat several times until " " appears when CTCSS, or " " ap-
pears when DTCS is selected.
1
A
Push
FUNC
TONE
r Push [A•
], then push [2•
FUNC
beep function.
• " " appears.
2
A
Push
FUNC
P.BEEP
34
].
TONE
D
CTCSS DTCS
] to activate the pocket
.
P BEEP
CTCSS DTCS
t When a signal with the matched tone is received, the
transceiver emits beep tones and blinks " ."
• Beep tones sound for 30 sec. and " " blinks. To stop the beeps
manually, push any key. " " continues blinking until step y is
operated.
CTCSS
y Push [PTT] to answer.
• " " disappears and cancels the pocket beep function automati-
cally.
DTCS