Table of Contents
Advertisement
Operation on the Machine > Frequently-Used Sending Method
6
Check the status.
1
Check the information.
Change if needed.
2
[Menu] > [Connection Test]
The message "Connected" appears when connection with the destination is correctly established. screen appears. If
"Cannot connect" appears, check the information you entered.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the Address Book by selecting [Add Address Book].
7
Select [OK].
Destinations can be changed later.
Checking and Editing Destinations (5-30)
8
Selecting the functions.
Selecting [Functions] displays a list of other functions.
[Send] (xii)
9
Press the [Start] key.
Start sending.
Scanning with a TWAIN/WIA Compatible Application
This section explains how to scan an original using TWAIN or WIA.
NOTE
Before sending a document, confirm that TWAIN/WIA driver is installed on a computer and the settings are
configured.
Setting TWAIN Driver (2-37)
Setting WIA Driver (2-39)
1
Display the screen.
1
Start up the TWAIN or WIA compatible application.
2
Select the machine using the application and display the dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
2
Configure the settings.
Select scanning settings in the dialog box that opens.
NOTE
For the settings, refer to Help in the dialog box.
5-19
Advertisement
Table of Contents
