Kyocera Ecosys M812cidn Operation Manual page 247

Table of Contents

Advertisement

Operation on the Machine > Printing Data Saved on the Machine
2
Select the box containing the document you want to print.
NOTE
If a custom box is protected by a password, enter the correct password.
2
Print the document.
1
Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.
NOTE
To cancel a selection, select the checkbox again so that it is no longer ticked.
2
Select [Print].
3
This displays a screen for selecting print settings to be used.
To use the settings used at the time of printing (when the document was saved), select [Print As Is]. Select [OK] to start
printing.
Printing begins.
If you need to change the print settings, select [Print after Change Settings].
4
Set the paper selection, duplex printing, etc., as desired.
For the features that can be set, refer to the following:
[Print] (xv)
5
Press the [Start] key.
Printing of the selected document begins.
5-44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys m830cidn

Table of Contents