Kyocera Ecosys M812cidn Operation Manual page 360

System Menu > [System/Network]
[Wired Network Settings]
Menu Transition: [System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings]
Configure settings for the Wired Network Settings.
[TCP/IP Setting]
Item
TCP/IP
IPv4
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
[Restart Network] (8-49)
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is
[On].
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot
be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot
be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot
be entered.
8-39
Description