Figure 1. Typical Parallel Capacity/Redundant System With Ssbm - Powerware 9315s Installation & Operation Manual

1
NOTE: 1. Accommodates one to eight UPMs.
Four UPM system shown.
2. The input transformer cabinet may be
installed on either the left or the right
side of the UPM cabinet.
3. Refer to the Powerware 9315 UPS
Installation manual provided with the
UPMs, for UPM, battery, and optional
input transformer installation
information.
4. Actual SSBM physical arrangement and
cable connection locations may differ
from that shown. See enclosed
switchboard vendor drawings for
details.
ii
1
1

Figure 1. Typical Parallel Capacity/Redundant System with SSBM

2
1
1 UTILITY POWER INPUT TO UPM
UPM OUTPUT TO SSBM INPUT
2
3 SSBM OUTPUT TO CRITICAL LOAD
4 UTILITY POWER INPUT TO BYPASS BUS
5
POWERNET DUAL REDUNDANT NETWORK
Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
5
5
*See Table N of Appendix A for UPM
Output Conductor Sizing.
SSBM INTERFACE - - TERMINAL BLOCK TB1
UPM INTERFACE - - TERMINAL BLOCK TB1
FOR 9315- -625/750 UPM ONLY:
ALSO INCLUDES DUAL REDUNDANT
NETWORK POWER SUPPLY
SBM INTERFACE - - TB7
UPM INTERFACE - - CANA & CANB
164201373 Rev. A
4
3
092402