Program Unit Name; Adjust Output Voltage; Change Password - Powerware 9315 UPS Operation Manual

Communication

7.7.5 Program Unit Name

If Program Unit Name is selected from the main menu, the following is displayed:
NOTE Unit Name is 45 characters maximum.
The current unit name is displayed on the second line of the display and in the headers of
prints from Terminal mode. If a change is desired, the new unit name should be entered at
the prompt. The unit name is 45 characters maximum and includes spaces and any
punctuation. If the user wants to center the text portion of the name, the appropriate
number of leading spaces should be included when entered.

7.7.6 Adjust Output Voltage

If Adjust Output Voltage is selected from the main menu, the following menu is
displayed:
The output voltage desired can then be entered or a carriage return for no change. Only
values within the range are accepted.

7.7.7 Change Password

If Change Password is selected from the main menu, the following menu is displayed:
NOTE Password must be six characters in length.
The password changes if the user enters and verifies the password. The entry must be six
characters.
7−16
EATON Powerware
Program Unit Name
Unit Name:
Enter New Name or <CR> No Change:
Adjust Output Voltage
Output Voltage Setup:
Output Voltage Range:
Enter Desired Output Voltage Setup:
Change Password
Enter New Password:
Verify New Password:
<CR> to return with no change.
9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev G www.powerware.com
®
480
456 − 504