You can use the LCD screen and the buttons beneath it to:
A
A
5.2 Using the Buttons
The buttons below the LCD screen are labeled with arrows indicating their functions:
A
A
A
5.3 Adjusting the Contrast
Use the buttons to adjust the contrast on the LCD screen. Hold down the
press the
5.4 Using the Load Off Button
The LOAD OFF button is red and covered by a clear plastic shield. In an emergency, you
can press this button to cut off utility power to the power processing unit of the UPS and
to the critical load. For more information, see Chapter 11, Using the LOAD OFF Button."
9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev G www.powerware.com
EATON Powerware
®
Monitor UPS operation
Look at a log of UPS events (alarms, notices, and commands)
Press the
and
buttons to move through the options in a menu, or to scroll through
the list of alarms and notices in the event log.
Press the
and
buttons to move through the menu titles on the menu bar. Press
them simultaneously to silence the horn, or to test the lamps behind the status
indicators.
Press the
button to toggle the use of the
and the information area.
button to increase the contrast or the
All power to the critical load is lost when you press the LOAD OFF button. You should use the
LOAD OFF button only when you want to de-energize the critical load.
Using the Monitor Panel
and
buttons between the menu box
button to decrease the contrast.
C A U T I O N
button, then
5−3