Instrument Panel Indicator - Honda FIT 2014 Owner's Manual

12/04/20 13:14:40 42TF2C00_080
High Temperature
Indicator
This indicator shows the
temperature of the engine coolant. It
normally comes on when you turn
the ignition switch to the ON (II)
position and goes off after a few
seconds. In normal driving
conditions, this indicator should not
blink or stay on. In severe driving
conditions, such as very hot weather
or a long period of uphill driving, this
indicator may blink. This means the
engine coolant temperature is high.
If the indicator begins to blink while
you are driving, be sure to slow down
to prevent overheating. If the
indicator stays on, pull safely to the
side of the road and turn off the
engine. See page 312 for instructions
and precautions on checking the
engine's cooling system.
Do not drive the vehicle while the
indicator is on or the engine may be
damaged.
You will also see the symbol ''
or this symbol with an ''ENGINE
TEMP. HIGH'' message on the
multi-information display.
Low Temperature
Indicator
This indicator shows the
temperature of the engine coolant. If
there is no problem, this indicator
comes on when the engine is cold. If
it comes on when the engine is warm
(normal operating temperature),
have the vehicle inspected by your
dealer as soon as possible.
Instrument Panel Indicators
,'' Low Fuel Indicator
This indicator comes on as a
reminder that you must refuel soon.
When the indicator comes on, there
are about 6.5 Litres of fuel remaining
in the tank.
You will also see the symbol
'' '' or this symbol with
''FUEL LOW'' message on the multi-
information display.
When the needle reaches E, there is
a very small amount of fuel in the
tank.
Instruments and Controls
75