12/04/18 14:42:54 42TF2C00_114
If you fail to enter your selection,
you will see ''SETTING
INCOMPLETE'' on the display for a
few seconds. The display returns to
the setting mode. Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the ''METER COLOR
CHANGE'' display.
To Exit the Meter Setup Customizing
Mode
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the ''METER SETUP''
display.
Multi-Information Display
Instruments and Controls
109