Honda FIT 2014 Owner's Manual page 112

12/04/18 14:42:42 42TF2C00_112
IGN OFF: The elapsed time is reset
when you turn the ignition switch to
the LOCK (0) position.
TRIP A: The elapsed time is reset
when you reset trip meter A.
TRIP B: The elapsed time is reset
when you reset trip meter B.
TRIP A is selected.
When your selection is successfully
completed, the display shows the
appropriate setting; ''IGN OFF
SETUP,'' ''TRIP A SETUP,'' or ''TRIP
B SETUP'' for a few seconds, then
goes back to the ''ELAPSED TIME
RESET'' display. Press the INFO
button repeatedly to select another
customizing mode.
Multi-Information Display
If you fail to enter your selection,
you will see ''SETTING
INCOMPLETE'' on the display for a
few seconds. The display returns to
the setting mode. Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the ''METER SETUP''
display.
CONTINUED
Instruments and Controls
107