Honda FIT 2014 Owner's Manual page 183

12/04/18 14:51:14 42TF2C00_183
Audio System
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
Use the TUNE button to
TUNE −
tune the radio to a desired frequency.
Press the button to tune to a
higher frequency, and press the
button to tune to a lower
frequency.
178
Features
You can also use the select button
and VOL knob to tune the radio to a
desired frequency. Push the select
button. You will see '' '' in the
display. Turn the VOL knob
clockwise to tune to a higher
frequency, or anticlockwise to tune
to a lower frequency.
The mode will be cancelled about 10
seconds after you stop adjusting the
knob. If you want to cancel the mode
within 10 seconds, push the select
button, ( ) button, or (
button.
The SEEK function
SEEK −
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press and hold the
button until you hear a beep.
SCAN − The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
)
station for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
or