Honda FIT 2014 Owner's Manual page 56

12/04/18 14:35:19 42TF2C00_056
Route the belt through the
2.
restraint according to the restraint
system maker's instructions, then
insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
TAB
Push down the tab. Route the
3.
shoulder part of the belt into the
slit at the side of the restraint.
Installing a Child Restraint System
Grab the shoulder part of the belt
4.
near the buckle, and pull up to
remove any slack from the lap part
of the belt. Remember, if the lap
part of the belt is not tight, the
child restraint system will not be
secure.
To remove slack, put weight on
the child restraint system, or push
on the back of the restraint system
while pulling up on the belt.
Driver and Passenger Safety
CONTINUED
51