Honda FIT 2014 Owner's Manual page 58

12/04/18 14:35:32 42TF2C00_058
Installing a Child Restraint
System with a Lap Belt
To install a child restraint system in
the centre back seat with the lap belt,
route the belt through the restraint
according to the restraint system
maker's instructions, then insert the
latch plate into the buckle.
Pull hard on the loose end of the belt
to remove any slack; it may help to
put weight on the child restraint
system while pulling on the belt.
Finally, push and pull the restraint
forward and from side-to-side to
verify that it is secure enough to stay
upright during normal driving
manoeuvres. If the restraint is not
secure, unlatch the belt and repeat
these steps.
Installing a Child Restraint System
Driver and Passenger Safety
53