Honda FIT 2014 Owner's Manual page 310

12/04/18 15:08:46 42TF2C00_310
WHEEL NUT WRENCH
Loosen each wheel nut 1/2 turn
9.
with the wheel nut wrench.
WHEEL NUT
J J
Place the jack under the jacking
10.
point nearest the tyre you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
NOTE:
Do not use the jack if it doesn't work
properly. Call your dealer or a
professional towing service.
A A C C K K I I N N G G P P O O I I N N T T S S
11.
12.
Changing a Flat Tyre
EXTENSION
WHEEL NUT WRENCH
Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tyre is off the
ground.
Remove the wheel nuts, then
remove the flat tyre. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat
tyre on the ground with the
outside surface facing up.
CONTINUED
Taking Care of the Unexpected
305