Honda FIT 2014 Owner's Manual page 109

12/05/10 17:26:46 42TF2C00_109
Multi-Information Display
Adjust the outside temperature value
by pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET
button to set the desired value.
104
Instruments and Controls
When your selection is successfully
▲ ▼ completed, the display shows '' 0°C
SETUP'' for a few seconds, then
goes back to the ''ADJUST
OUTSIDE TEMP. DISPLAY'' display.
Press the INFO button repeatedly to
select another customizing mode.
If you fail to enter your selection,
you will see ''SETTING
INCOMPLETE'' on the display for a
few seconds. The display returns to
the setting mode. Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the ''METER SETUP''
display.
±