Planning the Topology of the Avaya Scopia
Related links
Planning the Topology of the Avaya Scopia
Supporting ISDN Connectivity
About this task
The Avaya Scopia
routed to the relevant videoconference via the Gateway for ISDN.
For deployments without a gatekeeper, you can dial ISDN endpoints by simply dialing the ISDN
number. To do so, you must first configure the endpoint with your Gateway for ISDN, as described
below. The system then automatically and transparently takes care of setting the bit rate and call
routing through the Gateway.
December 2017
®
XT Series Deployment
Figure 2: Using XT Series for NAT and Firewall Traversal
®
XT Series supports ISDN connectivity, allowing calls from endpoints to be
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
®
XT Series Deployment
on page 19
22