Securing Recordings - Avaya Scopia XT Series Deployment Manual

Video collaboration solution for ip office
Hide thumbs Also See for Scopia XT Series:
Table of Contents

Advertisement

Table 61: Limiting or Disabling Access to Built-in MCU
Field Name
Enable
Display Participants
Name
Meeting Time Limit
Max Calls Limit
Max Calls
Local Audio-Video
Hide Meeting
Allow WEB
Management
Default Layout
Default Lecturer
Layout
3. From the web interface only, select Save.
Related links
Securing your XT Series

Securing Recordings

You can secure recordings by adding a digital signature to the recording.
A digital signature is a mathematical scheme for demonstrating the authenticity of data. A valid
digital signature gives a recipient reason to believe that the data was created by a known entity
December 2017
Description
Enable/disable meeting hosting.
Select Yes to display the participant name over the video. Select No to
display video without the participant name.
Specify the maximum duration of the meeting.
Enable/disable to set a maximum number of participants in a meeting.
Specify the maximum number of participants in a meeting.
Select No to ensure that the local audio and video is not sent when XT
Series is hosting a meeting. Select Yes to send the local audio and video
when XT Series is hosting a meeting.
Select Yes to hide the remote audio and video when XT Series is hosting
a meeting. This setting prevents local participants from accessing
meetings unless they have a PIN. Select No to display the remote audio
and video when XT Series is hosting a meeting. This setting enables local
participants to access meetings, even if they do not have a PIN.
Select No to disable web management when XT Series is hosting a
hidden meeting. Select Yes to enable web management when XT Series
is hosting a hidden meeting.
Specify the default layout when hosting a meeting in continuous presence
mode.
Specify the default layout when hosting a meeting in lecturer mode.
• Select 1 terminal to enable enhanced lecture mode. In enhanced
lecture mode, the XT Series hosting the meeting sends the local
participant video as the lecturer, while the lecturer can see the
Continuous Presence (CP) of other participants. This is the default
behavior.
• Select 2 terminals — A to send everyone, including the lecturer, the
lecturer video as a large display and the video of the previous/active
speaker as a small display.
on page 195
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Securing Recordings
199

Advertisement

Table of Contents
loading

Table of Contents