Configuring The Screen Saver To Start Automatically - Avaya Scopia XT Series Deployment Manual

Procedure
1. Access the time zone settings. From the XT Series web interface, select Administrator
Settings > System > Date & Time > Time Zone. From the endpoint's main menu, select
Configure > Advanced > System > Date & Time > Time Zone.
You need to enter the PIN required to access the Advanced settings. The default PIN is
1234.
2. Configure settings as described in
page 105.
Table 24: Configuring time zone related settings
Field Name
Enable Geolocation
Time zone list
Enable daylight time
Start (dd/mm)
Stop (dd/mm)
3. From the web interface only, select Save.
Related links
Configuring Basic Settings with the Quick Setup Wizard

Configuring the Screen Saver to Start Automatically

About this task
The screen saver helps to protect the endpoint's monitor from burn-in without switching it off.
Procedure
1. Access the screen saver settings. From the endpoint's main menu, select Configure >
General. From the XT Series web interface, select the Basic Settings tab.
December 2017
Table 24: Configuring time zone related settings
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
Description
Select Yes to enable the XT Series to automatically
detect the correct time zone and to apply the appropriate
daylight time value. The default is Yes. Select No to
manually specify the time zone using the Time zone list
as well as the start/stop dates to apply daylight saving
adjustment.
Note:
Geolocation requires Internet access.
Select the time zone to which the system belongs.
Choose whether to enable daylight savings time.
Set the day and month to indicate when daylight saving
time starts.
Set the day and month to indicate when daylight saving
time ends. If this is earlier than the start time, it assumes
the following year.
on page 96
on
105