Erasing Homelink; Buttons - Kia 2018 Stinger Owner's Manual

Erasing HomeLink

®

buttons

Individual buttons cannot be erased.
However, to erase all three pro-
grammed buttons:
1. Press and hold the two outer
HomeLink ® buttons until the indi-
cator light begins to flash-after 20
seconds.
2. Release both buttons. Do not hold
for longer than 30 seconds.
The Integrated HomeLink
Control System is now in the training
(learn) mode and can be pro-
grammed at any time following the
appropriate steps
Programming sections above.
FCC ID: NZLZTVHL3
IC: 4112A-ZTVHL3
Pursuant to Code of Federal
Regulations, Title 47, Part 15
("FCC Rules")
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference, and
® Wireless
2. This device must accept any inter-
ference received, including inter-
ference that may cause undesired
operation.
in the
Features of your vehicle
The transceiver has been tested and
complies with FCC and Industry
Canada rules. Changes or modifica-
tions not expressly approved by the
party responsible for compliance
could void the user's authority to
operate the device.
NVS ® and Z-NAV™ are registered
trademarks. Nav ® are of Gentex
Corporation, Zeeland, Michigan.
HomeLink ® is a registered trademark
owned by Johnson
Technology Company,
Michigan.
Controls
Holland,
4 63