Maintenance - Kia 2018 Stinger Owner's Manual

Maintenance

Normal Maintenance Schedule - Turbo Models
The following maintenance services must be performed to ensure good emission control and performance.
Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and time are shown, the
frequency of service is determined by whichever occurs first.
MAINTENANCE
INTERVALS
MAINTENANCE
ITEM
Drive belts * 1
Engine oil and engine oil
filter
Fuel additives * 2
Air cleaner filter
Spark plugs
Valve clearance * 3
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
* 1 : The drive belt should be replaced when cracks occur or tension is reduced.
* 2 : If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your
authorized Kia dealer along with information on how to use them. Do not mix other additives.
* 3 : Inspect for excessive valve noise and/or engine vibration and adjust if necessary. Have an authorized Kia dealer perform the
operation.
7 10
Number of months or driving distance, whichever comes first
Months 12
Miles×1,000 6
Km×1,000 10
Theta II 2.0L T-GDI R
Lambda II 3.3L T-GDI R
-
Theta II 2.0L T-GDI
Lambda II 3.3L T-GDI
Theta II 2.0L T-GDI
Lambda II 3.3L T-GDI
24 36 48 60 72 84
12 18 24 30 36 42
20 30 40 50 60 70
At first, inspect at 60,000 miles (100,000 km) or 72 months,
after that, inspect every 12,000 miles (20,000 km) or 24 months
R R R R R R
R R R R R R
Add every 6,000 miles (10,000 km) or 12 months
I - R - I
Replace every 42,000 miles (70,000 km)
Replace every 42,000 miles (70,000 km)
Inspect every 60,000 miles (100,000 km) or 72 months
Inspect every 60,000 miles (100,000 km) or 72 months
96 108 120 132 144 156 168 180
48 54 60 66 72
80 90 100 110 120 130 140 150
R R R R R
R R R R R
- R - I - R
78 84 90
R R R
R R R
- I -