Kia 2018 Stinger Owner's Manual page 205

Features of your vehicle
The high beam switches to low beam
in the below conditions.
- When the High Beam Assist is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected
from the on-coming vehicle.
- When the tail lamp is detected
from the front vehicle.
- When the surrounding is bright
enough high beams are not need-
ed.
- When streetlights or other lights
are detected.
- When vehicle speed is below 15
mph (24 km/h).
- When headlamp / taillamp of bicy-
cle/motorcycle is detected
4 118
The system may not operate normal-
ly in the below conditions.
• When the light from the on-coming
or front vehicle is not detected
because of lamp damage, hidden
from sight, etc.
• When the lamp of the on-coming or
front vehicle is covered with dust,
snow or water.
• When the light from the on-coming
or front vehicle is not detected
because of exhaust fume, smoke,
fog, snow, etc.
• When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged.
• When there is a similar shape lamp
with the front vehicle's lamps.
• When it is hard to see because of
fog, heavy rain or snow.
• When the headlamp is not repaired
or replaced at an authorized deal-
er.
• When headlamp aiming is not
properly adjusted.
• When driving on a narrow curved
road or rough road.
• When driving downhill or uphill.
• When only part of the vehicle in
front is visible on a crossroad or
curved road.
• When there is a traffic light, reflect-
ing sign, flashing sign or mirror.
• When the road conditions are bad
such as being wet or covered with
snow.
• When the front vehicle's head-
lamps are off but the fog lamps on.
• When a vehicle suddenly appears
from a curve.
• When the vehicle is tilted from a
flat tire or being towed.
• When the LKA (Lane Keeping
Assist) system warning light illumi-
nates. (if equipped)