Kia 2018 Stinger Owner's Manual page 29

Easy access function (if equipped)
To provide easier entry to or exit from
the vehicle for a driver, the driver's
seat will be adjusted backwards as
far as the distance set by User
Setting on the Instrument Panel. This
occurs when the driver's door is
opened and the Engine start/stop
button is Off with the shift lever in the
P position. If, however, the distance
between the front seat and back
seats are too close, the driver's seat
could fail to adjust itself backwards.
The steering wheel moves to the top.
With the steering wheel moving as far
as top and as far as forward to a driv-
er on a regular basis steering wheel
identifies and adjusts its location by
itself.
The driver's seat and steering wheel
will move back to its original position
when a driver closes a driver's door
with a smart key in his pocket and
the engine start/stop button is in OFF
or in ACC.
You can activate or deactivate this
feature. Refer to "User settings" in
chapter 4.
Safety features of your vehicle
Driver position memory system
reset
If the Driver position memory system
reset fails to work, initialize the sys-
tem as follows.
How to initialize:
1. Stop the car and open the driver's
door with the Engine start/stop
button in ON and the automatic
shift lever in P (parking) position.
2. Pull the driver's seat forward as far
as possible and have the seatback
upright as much as possible using
driver's seat forward adjustment
and seatback angle (recline)
movement switches.
3. Push SET button and seat fore
movement switch button for 2 sec-
onds simultaneously.
3 13