Headlamp (Low/High Beam) Bulb Replacement (Headlamp Type A) - Kia 2018 Stinger Owner's Manual

Hide thumbs Also See for 2018 Stinger:

Table of Contents

Headlamp (Low/High beam)

bulb replacement (Headlamp

■ Head lamp - Type A

1. Remove the service cover clip on

the wheel housing.

2. Remove the headlamp bulb cover

by turning it counterclockwise.

3. Disconnect the headlamp bulb

socket-connector.

4. Remove the bulb-socket from the

headlamp assembly by turning the

bulb-socket counterclockwise until

the tabs on the bulb-socket align

with the slots on the headlamp

5. Install a new bulb-socket assem-

bly in the headlamp assembly by

aligning the tabs on the bulb-sock-

et with the slots in the headlamp

assembly. Push the bulb-socket

into the headlamp assembly and

turn the bulb-socket clockwise.

6. Connect the headlamp bulb sock-

et-connector.

7. Install the headlamp bulb cover by

turning it clockwise.

8. Install the clip on the service

❈ If it is difficult to replace light bulbs,

have the vehicle checked by an

authorized Kia dealer.

Chapters

Table of Contents

Stinger gt 2018