Kia 2018 Stinger Owner's Manual page 316

Driving your vehicle
Prerequisite for activation
The FCA will activate when the FCA
is selected on the LCD display, and
when the following prerequisites are
satisfied:
- The ESC (Electronic Stability
Control) is activated.
- The driving speed is over 6 mph.
(The FCA only works within a cer-
tain range of vehicle speeds)
- When the FCA recognizes a vehi-
cle or the pedestrian in front. (The
FCA may not recognize every
obstacle or provide warnings and
braking in every situation, so do
not rely on the FCA to stop the
vehicle in instances where the driv-
er sees an obstacle and has the
ability to apply the brakes)
5 66
WARNING
To avoid driver distractions, do
not attempt to set or cancel the
FCA while operating the vehicle.
• The FCA automatically activates
upon placing the ignition switch to
the ON position. The driver can
deactivate the FCA by canceling the
swstem setting on the LCD display.
• The FCA automatically deactivates
upon canceling the ESC. When the
ESC is cancelind, the FCA cannot
be activated on the LCD display.
The FCA warning light will illumi-
nate, but it does not indicate a mal-
function of the system.
• Set or cancel FCA with controlling
switches on steering wheel after
stopping the vehicle in the safe
place for your safety.