Homelink ® With Auto-Dimming Rearview Mirror - Kia SPORTAGE 2018 Features & Functions Manual

OTHER KEY FEATURES
HomeLink with Auto-Dimming
®
Rearview Mirror*
A HomeLink button
®
B
HomeLink ® button
C Indicator light
D HomeLink button
®
A B C
The HomeLink /Auto-Dimming Rearview Mirror* is designed to
®
reduce glare from a vehicle's headlights located in the rear and also
connect up to three electronic transmitters into one location .
• To turn automatic dimming ON, press
• To turn automatic dimming OFF, press
C
REMINDER: Mirror indicator light will illuminate when automatic dimming is ON .
If your garage door opener was manufactured in 2011 or later, and you're unable to program
your vehicle's HomeLink system, you may need to purchase a HomeLink Repeater Kit. For
®
more information, go to www.HomeLink.com or call (800) 355-3515.
36 SPORTAGE
F E A T U R E S & F U N C T I O N S G U I D E
E Glare detection sensor
F
Automatic dimming ON
G Automatic dimming OFF
D E F G
button F
button G
How to Sync Transmitter with HomeLink
If programming for the first time, begin with Step 1 (repeating this step will
delete all information) .
To program non-rolling and rolling code garage door openers and other
devices:
1 . Press and hold the left A and center
indicator light C begins to flash (to reprogram buttons, skip this step)
2 . Press and hold the desired button
transmitter while it is approximately 1 to 3 inches away from the mirror .
The HomeLink Indicator light
®
signal has been successfully programmed
To finish programming rolling code garage door openers, complete these
steps:
3 . Locate the "learn" or "smart" button on the garage door's motor head unit .
Press and release the button and complete Step 4 within 30 seconds .
4 . Firmly press and release the programmed HomeLink
times .
QUICK TIP
• You can reprogram a single HomeLink
• Erasing programmed buttons will delete all trained transmitters
Operating HomeLink :
®
Press one of the programmed HomeLink
Erasing programmed buttons:
Press and hold the left A and center
approximately 20 seconds, and then release both buttons within 30 seconds .
*
®
D buttons simultaneously until the
A B D
, or and hold the button on the
C will flash rapidly once the frequency
button up to three
®
button by repeating Step 2
®
buttons .
®
D buttons simultaneously for
*IF EQUIPPED