Engine Compartment Fuse Replacement - Kia 2018 Stinger Owner's Manual

Hide thumbs Also See for 2018 Stinger:
Table of Contents

Advertisement

Maintenance
CAUTION -
Fuse Panel
Covers
The contact points of the
switches may wear out with
excessive use. Please refrain
from excessive use of the
switches (except for long-term
parking for over 1 month).
✽ ✽ NOTICE
• Set all switches to ON before driv-
ing.
• If the vehicle is going to be unused
for over 1 month, set all switches
to OFF to prevent the batteries
from draining.
7
58
Engine compartment fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang-
ing fuses located in the engine
compartment fuse box. Upon
removal, securely insert reserve
fuse of the same rating.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.
CAUTION
Always securely install the fuse
panel cover in the engine com-
partment to protect against
electrical failure which may
OCK077035
occur
from
Listen for the audible clicking
sound to ensure fuse panel
cover is securely fastened.
water
contact.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stinger gt 2018

Table of Contents