Using The Cli To View Mesh Statistics For An Mesh Access Point - Cisco aironet 1522 Design And Deployment Manual

Table 22
Statistics
Mesh Node
Security Stats
(continued)

Using the CLI to View Mesh Statistics for an Mesh Access Point

Use these commands to view mesh statistics for a specific mesh access point using the controller CLI.
•
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Mesh Access Point Statistics (continued)
Parameter
Unknown
Reauthentication
Requests
Invalid
Reauthentication
Requests
Unknown
Reassociation
Requests
Invalid Reassociation
Requests
To view packet error statistics; a count of failures, timeouts, and successes with respect to
associations and authentications; and reassociations and reauthentications for a specific mesh access
point, enter this command:
show mesh security-stats AP_name
Information similar to the following appears:
AP MAC : 00:0B:85:5F:FA:F0
Packet/Error Statistics:
-----------------------------
x Packets 14, Rx Packets 19, Rx Error Packets 0
Parent-Side Statistics:
--------------------------
Unknown Association Requests 0
Invalid Association Requests 0
Unknown Re-Authentication Requests 0
Invalid Re-Authentication Requests 0
Unknown Re-Association Requests 0
Invalid Re-Association Requests 0
Unknown Re-Association Requests 0
Invalid Re-Association Requests 0
Child-Side Statistics:
--------------------------
Association Failures 0
Association Timeouts 0
Association Successes 0
Authentication Failures 0
Authentication Timeouts 0
Authentication Successes 0
Re-Association Failures 0
Re-Association Timeouts 0
Description
The number of unknown reauthentication requests
received by the parent mesh access point node from its
child. This state may occur when a child mesh access
point is an unknown neighbor.
The number of invalid reauthentication requests received
by the parent mesh access point from a child. This state
may occur when a child is a valid neighbor but is not in a
proper state for reauthentication.
The number of unknown reassociation requests received
by the parent mesh access point from a child. This state
may occur when a child mesh access point is an unknown
neighbor.
The number of invalid reassociation requests received by
the parent mesh access point from a child. This state may
occur when a child is a valid neighbor but is not in a
proper state for reassociation.
Checking the Health of the Network
129