Cisco aironet 1522 Design And Deployment Manual page 80

Connecting the Cisco 1520 Series Mesh Access Point to Your Network
(Cisco controller) > show ap config general AP_Name
Information similar to the following displays to the screen.
Verifying BGN Using the GUI
To verify BGN using the GUI, follow these steps:
Click Wireless > Access Points > AP Name. the details window for the selected mesh access point
Step 1
appears.
Step 2 Click the Mesh tab. Details for the mesh access point including BGN appears. (See
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
80
Figure 47.)
OL-20213-01