Cisco aironet 1522 Design And Deployment Manual page 59

Figure 38
Step 2 Click New. The MAC Filters > New window appears (see
Figure 39
Enter the MAC address of the mesh access point.
Step 3
Note
From the Profile Name drop-down box, select Any WLAN.
Step 4
Step 5 In the Description field, enter a description of the mesh access point. The text that you enter identifies
the mesh access point on the controller.
Note
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
MAC Filtering Window
MAC Filters > New Window
For 1522, 1524PS, and 1524SB outdoor mesh access points, enter the BVI MAC address of the
mesh access point into the controller as a MAC filter. For 1130 and 1240 indoor mesh access
points, enter the Ethernet MAC. If the required MAC address does not appear on the exterior of
the mesh access point, enter the following command at the access point console to display the
BVI and Ethernet MAC addresses: sh int | i Hardware.
You might want to include an abbreviation of its name and the last few digits of the MAC
address, such as ap1522:62:39:10. You can also note details on its location such as roof top, pole
top or its cross streets.
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
Figure 39).
59