Cisco aironet 1522 Design And Deployment Manual page 166

Adding and Managing Mesh Access Points with Cisco WCS
Click the Map Name that corresponds to the outdoor area, campus, building, or floor you want to
Step 2
monitor.
Step 3 To view detailed information on mesh links for a mesh access point, click the arrow portion of the access
point label. The Access Points screen appears.
Step 4 Click the Mesh Links tab (see
Figure 100
You can also mesh link details for neighbors of a selected mesh access point by clicking on the View
Note
Mesh Neighbors link on the mesh access point configuration summary panel that displays when you
mouse over a mesh access point on a map. (See
Signal-to-noise (SNR) only appears on the View Mesh Neighbors panel. (See
Note
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
166
Figure 100).
Access Points > Mesh Links Panel
Figure 101.)
Figure 101.)
OL-20213-01