Cisco aironet 1522 Design And Deployment Manual page 165

Figure 99
At the Access Point configuration window, follow these steps to view configuration details for the mesh
Step 5
access point.
a.
b.
c.
d.
Monitoring Mesh Access Point Neighbors Using Maps
To view details on neighbors of a mesh access point from a mesh network map, follow these steps.
Choose Monitor > Maps.
Step 1
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
OL-20213-01
Mesh AP Detail Window
Choose the General tab to view the overall configuration of the mesh access point such as AP name,
MAC address, AP Up time, associated controllers (registered and primary) operational status, and
software version.
The software version for mesh access points is appended the letter m and the word mesh in
Note
parentheses.
Choose the Interface tab to view configuration details for the interfaces supported on the mesh
access point. Interface options are radio and Ethernet.
Choose the Mesh Links tab to view parent and neighbors' details (name, MAC address, packet error
rate, and link details) for the mesh access point. You can also initiate link tests from this panel.
Choose the Mesh Statistics tab to view details on the bridging, queue, and security statistics for the
mesh access point. For more details on mesh statistics, refer to the
Access Point" section on page
Adding and Managing Mesh Access Points with Cisco WCS
171.
"Mesh Statistics for a Mesh
165