Cisco aironet 1522 Design And Deployment Manual page 70

Connecting the Cisco 1520 Series Mesh Access Point to Your Network
In the controller GUI, click Wireless > Mesh. The Mesh window appears (see
Step 1
Figure 43
In the security section, select the EAP option from the Security Mode drop-down menu.
Step 2
Check the Enabled check boxes for the External MAC Filter Authorization and Force External
Step 3
Authentication options.
Step 4 Click Apply.
Click Save Configuration.
Step 5
Using the CLI to Enable External Authentication of Mesh Access Points
To enable external authentication for mesh access points using the CLI, enter the following commands:
a.
b.
c.
d.
e.
Using the CLI to View Security Statistics
To view security statistics for mesh access points using the CLI, enter the following command:
show mesh security-stats Cisco_AP
Command shows packet error statistics and a count of failures, timeouts, and association and
authentication successes as well as reassociations and reauthentications for the specified access point
and its child.
Cisco Aironet 1520, 1130, 1240 Series Wireless Mesh Access Points, Design and Deployment Guide, Release 6.0
70
Mesh Window
config mesh security eap
config macfilter mac-delimiter colon
config mesh security rad-mac-filter enable
config mesh radius-server index enable
config mesh security force-ext-auth enable (Optional)
Figure 43).
OL-20213-01