Table of Contents
Advertisement
(6) I/O Assignment
Set connection status of each module.
Project window [Parameter] [PLC Parameter] "I/O Assignment"
The following table shows setting items.
Item
Type
Select a connected module type.
Model Name
Enter the model name of the connected module when required.
I/O Assignment
Points
Select the occupied I/O points of a module connected to the head module.
Start XY
Enter the start I/O number.
Set intelligent function module switches.
button
Select output mode in the following status:
Error Time
Output Mode
PLC
Specify whether to stop the auto refresh of the head module or not, when a
Operation
hardware error occurs (when the head module detects SP.UNIT DOWN) in the
button
Mode at H/W
intelligent function module.
Error
I/O Response
Select the response time of an input module.
Time
Set the selected head module to I/O Assignment.
button
Set the Model Name, Points, and Start XY of the selected module to I/O
button
Assignment.
Description
• An error occurred in the head module.
• A data link error occurred.
CHAPTER 7 PARAMETER SETTING
Setting range
Empty, Input, Output, Intelligent
(Default: Blank)
Up to 16 characters
(Default: Blank)
0 Point, 16 Points, 32 Points, 64 Points,
128 Points
(Default: Blank)
0000H to 0FF0H
(Default: Blank)
Clear/Hold
(Default: Clear)
Stop/Continue
(Default: Stop)
1ms, 5ms, 10ms, 20ms, 70ms
(Default: 10ms)
7
63
Advertisement
Table of Contents
Troubleshooting
