Set-Up (Authorised Technical Staff Only) - Smeg UG405DSUK User Manual

6

SET-UP (Authorised technical staff only)

Set-up
During first start-up, the functions/parameters listed below must be set or adjusted.
Control Panel
Key to Symbols
On/off button
Total pump-out (tank -boiler) button
Regenerating salt symbol (only if softener is fitted)
Short programme button
Medium programme button
Long programme button
L1
Short programme Led
L2 Medium programme Led
L3 Long programme Led
L4 Drainage Led
L5 Appliance on Led
L6 No salt Led (only if softener is fitted)
Key to messages on display
CLOSE Close the door
FILL Machine preparing for cycle
End End of operation requested
PrF Machine model
400/500/CAP (viewed when the machine is started with master switch)
Version/revision of the installed firmware.
F x xx r xxx
(viewed when the machine is started with master switch, after the model code)
UnLoad Pump-out
OFF Energized machine OFF
9