Omron NT4S Operation Manual page 155

Standard Mode
. . . . . . . . This message is generated for all types of pro-
tocol and interface errors. The error codes
(CODE X) and SUBCODE (X) are protocol-spe-
cific and are listed in the respective application
documentation. The connection with the com-
munication partner has been interrupted.
RETRIES displays the number of unsuccessful
attempts to establish a connection. This num-
ber is incremented while the device is running.
The number of retries depends on the protocol
that is being used.
. . . . . . . . This message may be displayed during a
download. The S3 file addresses physical ad-
dresses in the terminal. The transmission is
aborted as soon as invalid addresses are de-
tected during this process. The starting address
of the invalid line in the S3 file is specified in
hexadecimal format.
. . . . . . . . Is displayed during a download if the Flash-
Eprom can not be programmed. This message
indicates that the application memory is defec-
tive. The starting address of the invalid line in
the S3 file is specified in hexadecimal format.
. . . . . . . . An error has occurred during transmission of
the user description. The error has either oc-
curred during the serial transmission or the S3
file contains invalid lines or no valid S3 file has
been transmitted. Recompile the application
description and attempt to retransmit.
. . . . . . . . Error during transmission of the user descrip-
tion. An error was detected in the S3 file of the
application description. More bytes were re-
ceived in one of the transmission lines than
specified in the byte count.
. . . . . . . . Transmission format of the user description
contains errors. The output file used has not
been generated by this programming system.
The transmitted file did not contain S0, S3 or
S7 lines, no S3 format was used.
Section 4-9
141