Omron NT4S Operation Manual page 151

Standard Mode
for as long as the Help key is held down. If several system messages are pending at
the same time, they will be displayed in order of their system numbers, whereby the
system message number '1' represents the highest display priority.
The user has the option of editing system message texts with the programming
software. The size of one screen is available for each message text. The system
message text can be freely designed using the terminal-specific font. Additional
character attributes or graphics are not possible.
The output of the texts is language-specific, i.e. if the operator guidance is multi-
lingual, the system messages are displayed in accordance with the selected lan-
guage.
System messages are assigned in the programming software via the system
message number. The system message number stands for a predefined event. A
brief info consisting of 20 characters is used to provide an explanation of the sys-
tem number. The length of the texts is designed to allow them to be displayed
directly on one line, even on the smallest display in the TesiMod operating terminal
series. When a selection is made in the programming software, the brief descrip-
tion is provided next to the number as a message name. A newly created system
contains the following system messages with brief infos:
System Message No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Brief Info
Wrong format
Value too large
Value too small
Replace battery
Message overflow
New message
Message buffer full
Invalid mask no
Invalid message no
Print log invalid
Interface in use
Invalid password
Password unchanged
Overvoltage
Data set protected
Illegal data set
Data set unknown
Data set memory full
Data set active
Data set transfer
Password missing
Editing mode active
Data set file error
Data set format
(Floating point) Number invalid
Loop through active
No data set address
Recipe unknown
Data set download
Section 4-9
137