Loadable Font; Maintenance - Omron NT4S Operation Manual

Standard Mode

4.6.3.14 Loadable Font

4.6.3.15 Maintenance

ChrsetName
Is used to display the current font name.
The name of the font is limited to a maximum length of 8 characters.
Data type:
Editor:
Output:
Possible values:
User1
User2
User3
User4
User5
Universal variables that permit the user to store information in the terminal. The
data are stored in the battery-backed RAM.
Data type:
Editor:
Output:
Possible values:
LCDADCInput
Is used to read the current input value from the AD-converter that is used for LCD
contrast control. This value is only designed to be used for diagnosis purposes.
Data type:
Editor:
Output:
LCDDACOutput
Is used to read the current output value from the DA-converter that is used for LCD
contrast control. This value is only designed to be used for diagnosis purposes.
Data type:
Editor:
Output:
Break
The current Editor is interrupted and the values entered are not transferred to the
controller. Trigger the Break function with a function key in a soft key.
Data type:
Editor:
Output:
Possible values:
Alphanumeric
---
---
(Standard) Display using terminal font
(Font name) Display using own font
Any
Any
Any
16 bit
Numeric
Any
---
Numeric
Any
---
Numeric
Function key, soft key, selection text, decimal num-
ber, binary number, hexadecimal number
---
(0) Initial state
(1) Editing process is terminated
Section 4-6
113