Irda Port; Audio Jacks; Table 6-10 Irda Port Specifications; Table 6-11 Active Audio Inputs - Fujitsu Stylistic 2300 Technical Reference Manual

IrDA Port

The IrDA port on the Stylistic 2300 pen tablet is compliant with the Infrared Data Association (IrDA)
Standard Revision 1.1. Specifications for the IrDA port on the pen tablet are given in Table 6-10. Before
you can use the IrDA port, the Serial Port B Device BIOS option must be set to IrDA or FIR. See
"Integrated Peripherals Submenu Options" on page 3-9 for details on BIOS options for the IrDA port.
Feature
Standard supported
Distance
Conveyable wave
Signal
Modulation/Data Rate
Angle

Audio Jacks

All audio jacks on the Stylistic 2300 pen tablet and Stylistic 1200 port replicator are stereo mini jacks.
Some audio functions on the pen tablet are disabled when audio jacks are used. Table 6-11 shows which
audio inputs are disabled when inputs on the pen tablet and port replicator are used (enabled). Table 6-12
shows which audio outputs are disabled when outputs on the pen tablet and port replicator are used.
Input Activity
Microphone On
(microphone built into pen tablet)
Pen tablet Microphone jack used
(external microphone connected)
Port replicator Microphone jack used
(external microphone connected)
Port replicator Line In jack used
NA indicates that the condition does not apply. (The condition has no effect on the given input.)

Table 6-10 IrDA Port Specifications

IrDA Standard Revision 1.1
Up to 1 meter point to point (environmental conditions affect usable range)
Infrared rays (wavelength peak 875 nm)
Send data / Receive data
IrDA SIR: 9.6 - 115.2 Kbps
IrDA FIR: 4,000.0 Kbps
0° to 15° from center of beam (30° viewing angle)

Table 6-11 Active Audio Inputs

Pen Tablet
Microphone
(built-in)
Enabled
Disabled
Disabled
NA
Specification
Port Replicator
Microphone Microphone
Input Jack Input Jack
Plug not Plug not
inserted inserted
Enabled Plug not
inserted
Disabled Enabled
NA NA
IrDA Port
Microsoft Corp. Exhibit 1020
Line Input
Jack
NA
NA
NA
Enabled
6-13