Fujitsu Stylistic 2300 Technical Reference Manual page 30

Table 3-4 BIOS Setup Integrated Peripherals Submenu Options (Continued)
Option
Parallel Port
Mode
Base I/O Address
Interrupt
ECP DMA Channel
Keyboard/Mouse Hot Plug
Internal Modem
3-10 Configuring the Stylistic 2300 Pen Tablet System
Settings
Disabled
Enabled
Auto
Output Only
Bidirectional
ECP
378
278
3BC
IRQ 5
IRQ 7
DMA 1
DMA 3
Disabled
Enabled
Disabled
Enabled
Description
Determines how system resources for the parallel
port are configured. Select Enabled to configure
resources manually. Select Auto to allow the BIOS
(or Plug and Play operating system) to configure
system resources for the parallel port. Select
Disabled to disable the parallel port.
Determines the operational mode for the parallel
port. Select Output Only, Bidirectional, or ECP
(Extended Capabilities Port) depending on which
setting is appropriate for your application.
This option is not displayed when the Parallel Port
option is set to Disabled.
Determines the base I/O address used for the
parallel port. This option is not displayed when the
Parallel Port option is set to Disabled.
Determines the interrupt request level used for the
parallel port. This option is not displayed when the
Parallel Port option is set to Disabled.
Determines the DMA channel assigned to the
parallel port when using ECP mode.
This option is not displayed when the Parallel Port
option is set to Disabled.
Determines whether hot plug capability is enabled for
the keyboard/mouse port. When Enabled is selected,
the system polls the keyboard and mouse ports
periodically for the presence of a keyboard or mouse
device. When a device is detected, the keyboard/
mouse interface is enabled.
(Note that this option must be set to Disabled when
using some scanner devices or bar code readers
such as the RS 1 Ring Scanner from Symbol
Technologies.)
Determines whether the system's internal modem is
enabled or disabled. This option is only displayed on
systems equipped with a built-in modem.
Microsoft Corp. Exhibit 1020