Chapter 1 Pen Tablet Features; Pc Card Support; Internal Modem; Acpi Support - Fujitsu Stylistic 2300 Technical Reference Manual

Chapter 1
Pen Tablet Features
This chapter provides an introduction to the Stylistic 2300 pen tablet system hardware and gives an
overview on some of the pen tablet system's features. Detailed specifications on the features discussed in
this chapter are given in other chapters of this guide.
The Stylistic 2300 pen tablet computer is designed for the Windows 95, Windows 98, and Windows NT
Workstation 4.0 operating systems using IBM-AT compatible architecture. The system uses an
electromagnetic pen digitizer and is available with either a color thin-film-transistor (TFT) display or a
color transflective (CTF) display.
The Stylistic 2300 pen tablet system has been tested by Windows Hardware Quality Labs (WHQL) at
Microsoft corporation and is compliant with PC 98 system design guidelines.

PC Card Support

The Stylistic 2300 pen tablet is equipped with two stacked Type II PC Card slots that allow you to install
two Type II PC Cards (using slots 1 and 2) or one Type III PC Card (using slot 1 only). The PC Card slots
are compliant with PC Card Standard Release 3.0 and provide support for the following PC Card
features:
• Zoomed Video Port (ZV Port) compliant I/O interface (slot 1 only)
• Multivoltage 3.3/5 V PC Cards (detected automatically)
• CardBus (PCI bridge) type PC Cards
• Supports PCIC (PC Card I/O Card) protocol
• Backward compatibility with previous PC Card Standard Release level PC Cards

Internal Modem

Stylistic 2300 pen tablet systems distributed in North America are equipped with an internal fax/modem;
systems distributed to countries outside North America are not equipped with a built-in modem. For
details on the built-in modem, see "Internal Modem Specifications" on page 5-8.

ACPI Support

The Stylistic 2300 pen tablet supports the Advanced Configuration and Power Interface (ACPI) Specification,
revision 1.0. The Windows 98 operating system supports ACPI; however, due to limitations of the initial
release of Windows 98, Advanced Power Management (APM) is the recommended setting and is the
default setting for Windows 98 systems. Refer to "Enabling ACPI" on page C-1 for more information.
Note: All Stylistic 2300 pen tablet systems are ACPI-compliant; however, the Windows 95 and Windows NT
4.0 operating systems do not utilize the ACPI design specification.
Microsoft Corp. Exhibit 1020
1-1