Security Menu Options; Table 3-8 Bios Setup Security Menu Options - Fujitsu Stylistic 2300 Technical Reference Manual

Security Menu Options

Security menu options for the Stylistic 2300 pen tablet are described in Table 3-8. Note that settings for
some security menu options determine whether other options are available.
Option
Set Supervisor Password
Supervisor Password Is
Set User Password
User Password Is
Password On Boot
Password Protect HDD

Table 3-8 BIOS Setup Security Menu Options

Settings
(Tap on the setting field for
this option or press Enter to
specify a supervisor
password.)
Enabled
Disabled
(Press Enter to specify a user
password.)
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
Description
Specifying a supervisor password grants access to
all password protected Security menu options.
When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security menu options:
Set Supervisor Password, Diskette Access, and
Fixed Disk Boot Sector.
When Enabled, a supervisor password (or user
password if used) is required to run BIOS Setup.
Indicates whether a supervisor password has been
specified. (This field cannot be changed directly. To
enable or disable the supervisor password, enter a
new password or clear the old password using the
Set Supervisor Password option.)
Specifying a user password grants access to the
following Security menu options only: User
Password, Password On Boot. Other Security menu
options are not accessible.
(When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security options: Set
Supervisor Password, Diskette Access, Fixed Disk
Boot Sector.)
When enabled, a user (or supervisor) password is
required to run BIOS Setup.
Note that a supervisor password must be enabled
before a user password can be specified.
Indicates whether a user password has been
specified. (This field cannot be changed directly. To
enable or disable the user password, enter a new
password or clear the old password using the Set
User Password option.)
Select Enabled to require a user or supervisor
password to boot the system. Note that a user or
supervisor password must be specified before this
option can be enabled.
This option protects data on the hard disk with the
password lock feature of the hard disk drive.
Select Enabled to prevent access to data on the hard
disk drive when it is used in another system. If the
drive is used in another system, the data can only be
accessed if the original password is used. (This
setting does not affect access to the drive when used
in the original pen tablet.)
If Disabled is selected, a password is not required to
read data from the hard disk when it is installed in
another system.
BIOS Setup
Microsoft Corp. Exhibit 1020
3-13