Removing A Dimm Card - Fujitsu Stylistic 2300 Technical Reference Manual

Removing a DIMM Card

To remove a DIMM card,
1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu. (Do
not attempt to remove or install a DIMM card when the system is in Suspend mode or running.)
2. Remove the screw from the cover plate on the back of the pen tablet and remove the cover plate as
shown in Figure 4-2.
3. Spread the fingers on the socket that lock the DIMM card in place until the DIMM card is loose.
4. Remove the DIMM card from the socket.
5. Reinstall the cover plate if you are not installing a new DIMM card.
The DIMM card is now removed from the pen tablet. Refer to "Installing a DIMM Card" on page 4-3 if
you are installing a new DIMM card.
4-4 Installing Hardware Options
Microsoft Corp. Exhibit 1020