Fujitsu Stylistic 2300 Technical Reference Manual page 122

5. Type the command dsk2300 using the following syntax:
dsk2300 option [path]filename
The path and filename specify the path and file name of the disk image file on the CD. The option
determines whether the file is downloaded and/or verified as follows:
option
download
fastload
verify
To load the image onto your hard disk, use either the download or fastload option.
Note that this command will take a relatively long time to run as every sector on the hard disk drive is
written to and/or read from the hard disk. (It takes about 1 hour 40 minutes to write and verify the
image on a 4 GB hard disk drive.)
When Dsk2300 is complete, the operating system is restored to its first-run state.
B-2 Recovering the Disk Image
Caution
This command will completely erase your hard disk drive.
Ensure that any valuable files on your hard disk (if
recoverable) are backed up.
Write image to C: drive and verify.
Write image to C: drive without verifying.
Verify image on C: drive matches image file on CD. (This option performs a
read-only comparison of the image file on the CD and the hard disk image.)
Microsoft Corp. Exhibit 1020