Figure A-2 Ide Hard Disk Drive Liner Tray Tab - Fujitsu Stylistic 2300 Technical Reference Manual

3. Pull up on the tab as indicated in Figure A-2 to lift one end of the hard disk drive partially out of the
pen tablet. This tab is part of a liner tray for the hard disk drive. When the drive is accessible, you can
hold the drive by the sides and lift it out enough to access the flex cable.
A-2 Replacing the IDE Hard Disk Drive
Caution
• Do not pull the tab on the flex cable connector when lifting
the drive. Doing so will damage the flex cable as it has
very little slack.
• Do not damage the hard disk drive's printed circuit board
when removing the drive. Handle the drive by the edges
and avoid touching the printed circuit board with your
hands or tools.

Figure A-2 IDE Hard Disk Drive Liner Tray Tab

Tab
Microsoft Corp. Exhibit 1020