Irda Port Configuration Submenu Options - Fujitsu Stylistic ST5100 Series Technical Reference Manual

IrDA Port Configuration Submenu Options

Configuration options for the IrDA Port Configuration submenu are given in Table 2-4.
Infrared Port:
Mode:
I/O Address:
Interrupt:
DMA Channel:
F1 Help
ESC Exit
Menu Field Options
Infrared • Disabled
• Enabled
Port:
• Auto
Mode: • IrDA
• FIR
I/O • 3F8 - 3FF
• 2F8 - 2FF
Address
• 3E8 - 3EF
• 2E8 - 2EF
Interrupt: • IRQ 3
• IRQ 6
• IRQ 10
• IRQ 11
DMA • DMA 1
Channel • DMA 3
PhoenixBIOS Setup Utility
Exit Submenu
IrDA Port Configurations
[Enabled]
[FIR]
[2E8-2EF]
[IRQ 6]
[DMA 3]
Select Item - Change Values
Select Menu Enter
Table 2-4. IrDA Port Configurations Submenu
Default Description
[Enabled] Determines whether the infrared port is active and the method used to
configure the infrared port.
• Select [Auto] to allow the BIOS or operating system to configure the
port automatically.
• Select [Enabled] to configure the I/O Address and Interrupt options
manually in BIOS setup.
• Select [Disabled] to turn off the infrared port.
[FIR] Determines which physical interface the infrared port is assigned to. Select
IrDA to use the IrDA port in Standard IR (SIR) mode (115 Kbps). Select FIR
to use the IrDA port in Fast IR mode (4 Mbps). Note: The Infrared port
option must be Enabled before this setting can be changed.
[2E8 - 2EF] Determines the base I/O address and interrupt request level used for the
infrared port. The Infrared Port option must be set to [Enabled] before this
setting can be changed.
[IRQ 6] Determines the interrupt number for the infrared port. Note: The Infrared
port option must be Enabled before this setting can be changed.
[DMA 3] Determines the DMA channel assigned to the infrared port when using Fast
IR mode. This option is only selectable when the Infrared Port Mode setting
is FIR.
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
Space F9
Select Sub-Menu F10
BIOS Setup Utility
Setup Defaults
Save and Exit
2
12