Figure A-3 Ide Hard Disk Drive Flex Cable - Fujitsu Stylistic 2300 Technical Reference Manual

4. To disconnect the flex cable, hold the large tab (on the flex cable connector) and pull the hard disk
drive away from the connector as shown in Figure A-3.
Note: The flex cable is not field replaceable and cannot be disconnected from the pen tablet. If the flex cable is
damaged, you must send the system back to the factory for repair.
Tab on Flex Cable
Connector
Once the hard disk drive is removed from the pen tablet, you can install a new hard disk drive. If you are
returning the hard disk drive, ensure that the packaging material will protect the drive sufficiently during
shipment.

Figure A-3 IDE Hard Disk Drive Flex Cable

Removing the Hard Disk Drive
Microsoft Corp. Exhibit 1020
A-3