Security Menu Options - Fujitsu ST4000 Technical Reference Manual

Security Menu Options

Security menu options for the Stylistic ST4000 Tablet PC are described in Table 2-11. Note that settings for some
security menu options determine whether other options are available.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
Boot from Removable Media:
Floppy Disk Access:
Hard Disk Security
Owner Information
Hard Disk Boot Sector:
F1 Help
ESC Exit
Option
Supervisor Set
Password Is Clear
User Password Is Set
Clear
Set Supervisor (Tap on the setting
Password field for this option
or press the <Enter>
key to specify a
supervisor
password.)
Set User Password (Tap on the setting
field for this option
or press the <Enter>
key to specify a user
password.)
PhoenixBIOS Setup Utility
Advanced Security
Select Item -/Space
Select Menu Enter
Table 2-11. BIOS Setup Security Menu Options
Settings
Indicates whether a supervisor password has been specified. (This field cannot
be changed directly. To enable or disable the supervisor password, enter a
new password or clear the old password using the Set Supervisor Password
option.)
Indicates whether a user password has been specified. (This field cannot be
changed directly. To enable or disable the user password, enter a new
password or clear the old password using the Set User Password option.)
Specifying a supervisor password grants access to all password protected
Security menu options.
When a supervisor password is enabled and a user password is used to enter
BIOS Setup, the user cannot access the following Security menu options: Set
Supervisor Password, Floppy Disk Access, and Hard Disk Boot Sector.
When enabled, a supervisor password (or user password if used) is required
to run BIOS Setup.
Specifying a user password grants access to the following Security menu
options only: User Password, Password On Boot. Other Security menu
options are not accessible.
(When a supervisor password is enabled and a user password is used to enter
BIOS Setup, the user cannot access the following Security options: Set
Supervisor Password, Floppy Disk Access, Hard Disk Boot Sector.)
When enabled, a user (or supervisor) password is required to run BIOS Setup.
Note that a supervisor password must be enabled before a user password can
be specified.
Power Boot Info
Item Specific Help
Clear
Clear
Press [Enter] key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
[Disabled]
Then password entry is
[All]
required to enter BIOS
[All]
Setup.
[Normal]
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Description
BIOS Setup Utility
Exit
2
17